Enhance the beauty of your natural wood products with Timber Products Company’s newest innovation, RhinoCoat™ prefinished panels.
RhinoCoat UV prefinishing is applied using an innovative ultraviolet curing technology, which contains no harmful volatile organic compounds (VOCs) and emits zero formaldehyde. By reducing the need for on-site spray finishing and drying in low-wear applications, RhinoCoat prefinished hardwood panels can help you increase your throughput, reduce factory emissions, enhance quality and improve overall manufacturing efficiency by allowing finishing labor to focus on more critical areas of production.
Because we know you need flexibility in your projects, RhinoCoat prefinished panels are available in a wide range of sizes, thicknesses, veneer species and core materials. Our finish has been engineered to meet your requirements and has been tested against multiple industry standards.
RhinoCoat prefinished panels can be customized to meet your needs for every application and are offered in a variety of gloss levels.
UV Curing Technology
Ultraviolet curing technology is one of the most environmentally conscious ways to finish a product. UV curing contains no formaldehyde and no harmful volatile organic compounds. In addition to the environmental benefits, RhinoCoat UV finished panels provide you with a durable surface for low-wear applications and won’t show any effect from common household chemicals, foods or solvents.
To help you control expenses, the overall finish cost for UV-cured panels is well below that of traditionally applied coatings. Our flatline process helps reduce waste by allowing excess finish to be recycled and reapplied. You’ll also see additional cost advantages with RhinoCoat panels through improved production and labor efficiencies.
RhinoCoat prefinished panels are a perfect solution for applications such as drawers, cabinet interiors, interior shelves and other low-wear applications.
With prefinish lines in Oregon and Mississippi, Timber Products Company can provide RhinoCoat prefinished panels to customers from coast to coast. Quickly. Cost-effectively. Customers can buy prefinish from both locations and be assured of getting the exact same product and quality.
For a custom prefinishing consultation, contact your Timber Products sales representative in Oregon at (800) 547-9520 or in Tennessee at (800) 477-6195. Or e-mail us at firstname.lastname@example.org.
|In addition to the natural aesthetic qualities and premier fnishing properties, RhinoCoat panels are built to meet these performance standards:|
|ASTM D 968||Falling Sand Abrasion Resistance||Pass 7 Liters falling sand|
|ASTM D 1308||Effect on Household Chemicals||Pass covered spot test|
|ASTM D 2197||Scrape Adhesion Balance Beam Scrape Tester (Belmar)||Pass 5 Kg load|
|ASTM D 3359||Cross Hatch or X Scribe Tape Adhesion||Pass 4B-5B|
|ASTM D 3363||Pencil Hardness||Pass 2H (test results may be skewed due to hardness of face veneer or core)|
|ASTM D 4060||Abrasion Resistance Using Taber Abraser||Pass 500 cycles CS-17 abrasive wheel|
|AWI 1500-G-6||Standard Production Finishes;
AWI-G-7 Specialty Finishes
|Equals or exceeds all finishes listed in these designations. Refer to AWI 1500-G-9 Finish System Performance Table|
|AHA Class II Hardwood||Pass tests that would be relevant to hardwood plywood|
|ASTM D 2794||Impact Test||Pass 20 inch-pounds of direct impact|
|KCMA/NKBA Chemical Reagents (similar to ASTM 1308 as listed above)||Pass all tests|