|
HARDWOOD VENEER SELECTION
Timber Products Company offers its customers the widest range of hardwood veneers available in America. From the more common species to the exotic, Timber Products is your best source for the kind of wood you need, when you need it, and at a competitive price.
Here are just a few of the species we offer, all of which come in a variety of grades and configurations.
VENEER SPECIES
 |
 |
 |
 |
| Ash |
Birch |
Cedar |
Cherry |
 |
 |
 |
 |
| Hickory/Pecan |
Maple |
Mahogany |
Pine |
 |
 |
 |
 |
| Red Oak |
Walnut |
White Oak |
VG Fir |
Speciality and Import Species also available. Most species available in both rotary and sliced.
VENEER CUTS
 |
 |
Rotary: Produces a multi-patterned grain veneer.
The log is centered in the lathe and turned against a knife blade at a slight angle, like unwinding a roll of paper, following the log's annular growth rings. |
Quarter Slicing: Produces straight grain veneer. The growth rings of the log strike the blade at approximately right angles, producing a series of stripes that are straight in some woods, varied in others. |
 |
 |
| Rift-Cut: Produces a rift or comb grain effect. To minimize ray fleck, the log is cut at an angle of about 15% off the quartered position and at a light angle to the medullary rays radiating from the center. |
Flat or Plain Slicing: Produces a distinct cathedral grain veneer.
The half log, or flitch, is mounted so that the slicing is done parallel to a line through the center of the log. |
| Half-Round Slicing: Produces a cathedral-like grain veneer with more rounded tops. A variation of rotary cutting that shows modified characteristics of both rotary and plain sliced vendors. |
SIZES
Medford and Grants Pass, Oregon Divisions
1/8" - 1 1/2"
4' x 8' and 4' x 10'
Corinth, Mississippi Division
5/32" - 1 1/2"
4' x 6', 4' x 7',
4' x 8' and Crossgrain
ADHESIVES
Urea
PVA Glues
Phenolic
SUBSTRATES
Pro-Core PXB
Pro
|
