TSCA Title VI Resources

Composite Panel Emissions Regulations

Emissions Standards for Engineered Wood Products

We at Timber Products Company are dedicated to producing the highest quality wood products through sustainable and environmentally responsible practices. As part of this commitment, we ensure all our applicable products are certified under the Environmental Protection Agency’s (EPA) regulations, including: hardwood plywood, composite panels, and particle board.

As of June 1, 2018, all composite wood products must be compliant with the EPA’s Toxic Substance Control Act (TSCA) Title VI regulation. This certification and our compliance statements are also included in all our invoices and order acknowledgements. The EPA established Title VI of TSCA to regulate the chemical emissions produced by three important composite wood products: hardwood plywood, medium-density fiberboard (MDF), and particle board. Read on to learn about Timber Products’ compliance with the latest EPA regulations and industry best practices.

Environmentally Certified

We maintain an excellent reputation with state and federal agencies that oversee environmental issues. Our forest lands, managed by Michigan-California Timber Company, are SFI certified and are audited annually by PwC.

  • US Green Building Council logo
  • SCS Global Services logo
  • Forest Stewardship Council logo
See Our Certifications

Timber Products Facilities Certified for TSCA Title VI

The following Timber Products manufacturing facilities are certified for TSCA Title VI compliance. 

Hardwood Plywood Facilities: 

  • Medford, Oregon: Creating hardwood plywood that’s both attractive and efficiently produced, the Medford facility is a pioneer in innovative technology breakthroughs for hardwood manufacturing.
  • Grants Pass, Oregon: This facility specializes in manufacturing custom hardwood plywood in various thicknesses, from 5/32” to 1 ½”, spanning lengths of 6 to 10 feet and widths up to 48”.
  • Corinth, Mississippi: Specializing in 3-ply hardwood plywood, prefinished panels and roll laminates, our Corinth facility uses many types of high-quality substrates.

Particle Board Facilities:

  • Ampine – Sutter Creek, California: The Ampine facility focuses on various particle board products, ranging in thicknesses, widths, and lengths for fire-rated and moisture-resistant specialty applications.
  • Medford, Oregon: Since 1965, the Medford facility has been manufacturing particle board, using recovered hardwood and softwood plywood from the same facility, and chips and sawdust from our Yreka facility.

Though not a certified facility, our Spectrum division, located in White City, Oregon – a fabricator of laminated products – obtains compliance for TSCA Title VI by maintaining records of their purchases and utilization of TSCA Title VI compliant cores in their product fabrication.

Frequently Asked Questions

Where can I find Timber Products' TSCA Title VI certificates of compliance?

Timber Products has five manufacturing locations certified for both the EPA TSCA Title VI and CARB Phase 2: Particle board facilities in Medford, Ore. and Ampine in Sutter Creek, Calif.; Hardwood Plywood facilities in Corinth, Miss., and two in Oregon located at Medford and Grants Pass. Our Spectrum facility is TSCA Title VI compliant.

The TSCA Title VI regulation recognizes CARB certifications until March 21, 2019; therefore, our CARB Executive Orders are recognized as supporting certification documents for TSCA Title VI. All certificates are available in our library, listed under our environmental certifications and certificates. Starting April 16, 2018, all Timber Products materials regulated by EPA TSCA Title VI and CARB Phase 2 are being labeled as certified or compliant, and compliance statements are listed on both order acknowledgments and invoices.

What is TSCA Title VI?

Effective June 1, 2018, Title VI of the Toxic Substances Control Act sets a new standard for allowable emissions from adhesives used in composite wood products. These national regulations align closely with the strict rules established by the California Air Resources Board (CARB). If wood products are already labeled as CARB Phase 2 compliant, the labeling will still be valid under TSCA Title VI regulations until March 22, 2019.

What is Timber Products doing to meet these standards?

We prioritize sustainability throughout the manufacturing process, from harvesting raw materials all the way to producing finished panels. Our wood products already meet the TSCA Title VI chemical emissions standards, so our customers can rest assured that the panels we sell adhere to all applicable regulations. Timber Products will label all its products by April 16, 2018, ahead of the compliance date of June 1, 2018, set by the EPA.

Will this change how Timber Products approaches sustainability?

Although our hardwood plywood and composite panels are already Title VI compliant, we are committed to perpetually improving our sustainability efforts. Even before CARB enacted its Phase 2 standards in 2009, we made strides in minimizing harmful emissions to ensure high air quality, and we look forward to continuing to innovate towards a cleaner, greener future.

I’m a wood product distributor. How will this legislation affect my business?

TSCA Title VI requires labeling on composite wood panels manufactured with adhesives containing formaldehyde and other chemicals that can emit harmful gasses, as well as finished goods made with these products. All applicable panels from Timber Products Company will be labeled to certify that they meet federal emissions standards.

My business is in California. How do I stay compliant with CARB Phase 2?

With the implementation of the Title VI regulations, products do not have to be dual labeled. This means that if you are Title VI compliant, you are also CARB Phase 2 compliant. Read more about this announcement on the Air Resources Board website.

If your product is made with particle board, hardwood plywood, or medium density fiberboard, you must label it appropriately. If you’re not sure if your composite wood product is compliant for formaldehyde Phase 2, look for a label – it should include the fabricator’s name, date the material was produced, and language that indicates its compliance. The label may include text like “California Phase 2 Compliant” or “California 93120 Compliant for Formaldehyde.” If you’re not sure if your goods comply with CARB Phase 2, reach out to Timber Products to speak with an expert that will help determine what steps are next for your business.

Who Certifies Timber Products manufacturing facilities?

Ampine, Medford and Grants Pass facilities utilize the Composite Panel Association (CPA) as their Third-Party Certifier (TPC). Corinth hardwood plywood utilizes the HPVA Laboratories as their TPC.

Where can I find more information about this legislation?

To learn more about Title VI and how it affects you and the products we supply, read our recent press release from June 18th, 2018 or speak to a Timber Products expert. Additionally, the EPA provides various resources on TSCA Title VI and CARB Phase 2 legislation.

This Carb Phase II Compliant labeling represents what you should be looking for on your wood products from Timber Products Company.

Other EPA Resources: